HBDV-1H High-Temperature Digital Viscometer
The HBDV-1H High-Temperature Digital Viscometer is designed for viscosity measurement of materials that require heating before or during testing, including asphalt, hot melt adhesives and polyethylene wax. It is suitable for laboratory QC, formulation development and temperature-dependent viscosity studies.
- 800–80,000,000 mPa·s
- RT +10°C to 300°C
- 0.1–99.9 RPM
- Accuracy:±1% F.S.
- Repeatability: ±0.5% F.S.
- Sample Volume:10–20 mL
Features of HBDV-1H Digital Viscometer
- The main measurement is solid at room temperature and liquid after high temperature heating, such as asphalt, hot melt adhesive, polyethylene wax and so on.
- The measured data can be displayed directly on the LCD screen without secondary calculation. < VSoft Viscometer Data Collection,Analysis and Graphing Software > can also be selected to realize data acquisition and analysis and to compile the viscosity-temperature curve.
- High subdivision stepper motor, accurate and stable speed.
- LCD liquid crystal with blue backlight function can directly display the viscosity, speed, percentile torque, spindle number and the maximum viscosity and temperature of the selected spindle at the current speed. DV-2 series can also show shear rate and shear stress. Viscosity value shows continuous change, beyond the measurement range there is an alarm sound prompt.
- The measuring performance of the instrument has reached the level of the same type of products abroad through computer correction accuracy.
- High-temperature furnace uses embedded integral heating, uniform heating and small thermal inertia.
What Can the HBDV-1H High-Temperature Digital Viscometer Measure?
How to Operate High-Temperature Digital Viscometer?
1. Prepare the Sample
Place approximately 10–20 mL of sample into the high-temperature sample container.
2. Set the Test Temperature
Heat the sample to the required measurement temperature.
3. Select Spindle and Speed
Install a suitable spindle and set the rotational speed according to the expected viscosity.
4. Allow the Reading to Stabilize
Confirm that temperature and viscosity readings have stabilized before recording the result.
5. Record or Export Data
Read the result directly from the display or use optional VSoft software for data collection and viscosity–temperature analysis.
Is HBDV-1H the Right Model for Your Sample?
HBDV-1H is intended for high-temperature, medium- to high-viscosity measurements. Before selecting the model, consider the expected viscosity at the actual test temperature rather than the viscosity of the material at room temperature.
If your sample viscosity may fall below 800 mPa·s after heating, a lower-range high-temperature model may provide a more suitable measuring range.
FAQ
Specifications of HBDV-1H Digital Viscometer
| Measuring Range（mPa·s） | 800 ～ 80,000,000 |
| Rotating Speed (RPM) | 0.1 ～ 99.9（Stepless Gear） |
| Number of Spindles | Spindles (Code21、27、28、29) are equipped with the product |
| Accuracy | ±1% full scale range in use |
| Repeatability | ±0.5% full scale range in use |
| Sample capacity (m L) | 10～20 |
| Temperature control range(℃) | 10℃ above ambient～300℃ |
| Power | Power adapter(input:220V 50Hz) |
| LCD screen display | Viscometer：The LCD screen can display the viscosity, speed, torque spindle, temperature and the maximum viscosity can be measured in the current spindle speed value. The temperature controller：Display setting temperature and actual measuring temperature. |
Components of HBDV-1H Digital Viscometer
| Digital viscosity meter | 1 pce | Ascending and falling | 1 set |
| Frame and pipe | 1 set | Power adapter | 1 pce |
| Standard spindle | 1 set | Spanner | 1 pce |
| Seat and leveling feet | 1 set | RTD temperature probe | 1 pce |
| Temperature controller | 1 pce | Heating furnace | 1 pce |
| Insulation cover | 1 pce | Special tweezers | 1 pce |
| Position bracket | 1 pce | Connect cable | 1 pce |
| Power cord | 1 pce | Connection hook | 2 set |
Customer Feedback
M* H***
Germany
A* K***
Poland
S* P***
Indonesia
A* E***
Egypt
L* C***
Chile
R* A***
UAE
C* M***
Brazil
N* T***
Vietnam
J* V***
South Africa
D* R***
Mexico
E* Y***
Turkey
Why Choose Us?
One-Station Shopping
“Multiple suppliers” have always been an issue in the procurement process. Drawell as a one-stop laboratory equipment and scientific instruments supplier, can perfectly solve this problem. In addition to manufacturing our own equipment, we also represent other laboratory equipment. Our product lines are rich and diverse at competitive prices. Provide one-stop service to customers.
Customer-centric Services
User Training – Training by Drawell skilled engineers about installation, debug tests, technical services, etc. It can happen in our factory in China, or at the site in the customers’ country. Cost depends on where and when the training happens.
Online Support
To discuss the problem and get it resolved, online chats, real-time video calls, and remote guidance. For the after-sales stage, our online technical guidance is free and ready forever.
100% Quality Guarantee Policy
1 year free official warranty, including repairing quality-damaged parts, and offering replacements of selected parts (shipping cost is extra). 5% of the product price is charged for extending the warranty before the end of the official warranty.
