ECO-S Series Ultrapure Water System (Tap water inlet)
With LCD controlling system, 2 way water quality sensor, timing and quality dispensing, single stage RO system, 1 pump, and built-in 12 liters tank, Eco-S series ultrapure water system is economic choice of ultrapure water for high grade experiments.
With tap water inlet, its output ranges from 15 to 30 liters/hour. It can produce single stage RO water and ultrapure water. The single stage RO water’s ion rejection rate is more than 96%, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.
Flow Schematic
Specifications
| Model | Standard | Eliminating endotoxin | Low TOC | Synthesizing |
| Eco-S15 | Eco-S15UF | Eco-S15UV | Eco-S15UVF | |
| Eco-S30 | Eco-S30UF | Eco-S30UV | Eco-S30UVF | |
| Output(25℃)* | 15series-15 liters/hour, 30 series-30 liters/hour | |||
| Flow rate | Up to 2 liters/minute (with pressure tank) | |||
| Pure water outlet | 2: reverse osmosis water, ultrapure water | |||
| Ultrapure water quality | ||||
| Resistivity(25℃) | 18.2MΩ.cm | |||
| TOC* | <10ppb | <10ppb | <3ppb | <3ppb |
| Bacteria | <0.1cfu/ml | |||
| Particle(>0.1μm) | <1/ml | |||
| Endotoxin | N/A | ＜0.001Eu/ml | N/A | ＜0.001Eu/ml |
| RNases | N/A | <0.01ng/ml | N/A | <0.01ng/ml |
| DNases | N/A | <4pg/μl | N/A | <4pg/μl |
| RO water quality | ||||
| Ion rejection rate | 96%-99% (new RO membrane) | |||
| Organic rejection rate | >99%, when MW>200 Dalton | |||
| Particles and bacteria rejection rate | >99% | |||
| Feed water requirements | Tap water, temperature:5-45℃,pressure:1.0-4.0Kgf/cm2 | |||
| Dimension and weight | Length×Width×Height:340×500×560mm / Weight: about 18Kg | |||
| Electrical requirements | AC110-240V, 50/60Hz | |||
| Power | 72W | |||
| Standard configuration | Main body (Including 1 set of cartridge)+built-in 12 liters pressure tank | |||
Remarks:
*The value will be influenced by temperature and feed water’s quality.
