Edi-S Series Ultrapure Water System (Tap water inlet)

With LCD controlling system, 3 way water quality sensor, timing and quality dispensing, single stage RO system，2 pump and IonpureEDI module, Edi-S ultrapure water system is superior choice of ultrapure water for high grade experiments.

With tap water inlet, the largest capacity is 240 liters per day. It can produce deionized water and ultrapure water. 

The deionized water is stable grade II pure water with resistivity>5MΩ.cm(25℃), TOC<30ppb, and the lowest running cost. It completely meets the requirements of general chemical or biological experiments for pure water, and is up to the standard of ISO 3696(Type II), ASTM D1193 (Resistivity of type II and TOC), and the requirements for pure water of CLSI (NCCLS) clinical laboratory, GB/T6682, America, Europe, Japan’s pharmacopeia.

And the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.

Edi-S Series Brochure

Flow Schematic

Edi S series ultrapure water system flow

Specifications

ModelStandardEliminating endotoxinLow TOCSynthesizing
Edi-S10Edi-S10UFEdi-S10UVEdi-S10UVF
Output10 liters/hour
Pure water outlet2: deionized water, ultrapure water
Ultrapure water quality 
Resistivity(25℃)18.2MΩ.cm
TOC*<10ppb<10ppb<3ppb<3ppb
Bacteria<0.1cfu/ml
Particle(>0.1μm)<1/ml
EndotoxinN/A＜0.001Eu/mlN/A＜0.001Eu/ml
RNasesN/A<0.01ng/mlN/A<0.01ng/ml
DNasesN/A<4pg/μlN/A<4pg/μl
Deionized water quality 
Resistivity>5MΩ.cm
TOC*<30ppb
Silicone rejection rate>99.9%
Feed water requirementsRO water, distilled water, deionized water, 5-45℃,1atm*
Dimension and weightLength×Width×Height:500×360×540mm / Weight: about 20Kg
Electrical requirementsAC110-240V, 50/60Hz
Power120W
Standard configurationMain body (Including 1 set of cartridge)

Remarks:

*The value will be influenced by temperature and feed water’s quality.

Edi-S series can be upgraded to touch screen system, just the same as Master to Master Touch.