Table of Contents

DW-RE-6000A Rotary Evaporator with Water & Oil Bath

DW-RE-6000A is a 6 L laboratory rotary evaporator designed for larger-volume evaporation, concentration and reduced-pressure processing. It combines a water/oil dual-purpose bath, 0–310 rpm rotation, automatic lifting, timed forward/reverse rotation and a 0.45 m² double-layer condenser. Standard and vacuum-control configurations are available for different laboratory workflows.

6 L Processing Capacity
3 L/h H₂O / 6 L/h Ethanol Maximum Evaporation Capacity
0–310 rpm Rotation Speed
RT–99°C ±0.5°C Water Bath
RT–210°C ±2°C Oil Bath
0–140 mm Automatic Lifting Stroke

RE-6000A Series Brochure

Description

Features of DW-RE-6000A Rotary Evaporator

Large LCD display, menu interface and knob switch operation
Rotating DC motor power: 90W Smooth start
Heating pot: Teflon coating makes it easy to clean, resistant to corrosion, and resistant to high temperatures
Three-way receiving flask & condenser assembly equipped with anti-backflow device
Unmanned mode safe operation function and automatic standby after the experiment
Intermittent timing positive and negative rotation can be set, suitable for drying process
Special bottle return knob design makes bottle return simple and convenient
Optional vacuum system, can be set to control any vacuum degree
Sealing unit: Imported PTFE+ special process mold synthesis
The heating pot is designed with a safety handle and an insulated shell to prevent burns
Touch type and handle type double automatic lifting and lifting make the lifting and lifting safer
Equipped with a protection cap, which is heat preserved, energy saving and anti-spill and anti-boiling

Safety Protection

Dry-Running Protection — Helps protect the heating system when operating conditions are abnormal.
Overtemperature Alarm — Alerts the operator when the temperature exceeds the set condition.
Rotation Motor Alarm — Detects abnormal rotation conditions.
Automatic Flask Lifting — Raises the sample flask away from the heating bath when abnormal conditions occur.
0–999 min Timer — Supports timed operation with standby alarm protection.

Technical Parameter of DW-RE-6000A Rotary Evaporator

Model	DW-RE-6000A
Type	Standard	Vacuum control
Rotating Speed	LCD display 0~310rpm/min
Evaporation capacity	Inner diameter φ50mm glass sealed shaft, with high efficiency. Maximum flow rate: 3L/H (H2O), 6L/H (ethanol)
Vacuum	The internal vacuum of the equipment can reach1-8mbar
Vacuum control	Built-in vacuum controller (arbitrary control experiment required vacuum degree, setting range: (0~ -0.1Mpa) 0~1013mbar; Accuracy ±1).
Temperature range	water and oil dual-purpose pot water bath: room temperature ~99℃±0.5℃;Oil bath: room temperature ~210℃±2℃.
Bath material	Disposable Teflon coating, easy to clean.Equipped with high temperature resistant Teflon protective cover.
Bath size	φ29×17cm
Sample bottle	Intermittent rotation around, intermittent time adjustable 0 ~ 60s, can be used for drying powder samples
Lift stroke	Cantilever heating bath lifting structure with touch screen automatic balance adjustment; the lifting stroke ranges from 0 to 140 mm, and safety margins are reserved at the upper and lower travel limits to avoid collision.
Safety performance	Dry-burning prevention & overtemperature alarm, abnormal rotation motor alarm, automatic lifting of sample flask away from heating bath liquid surface; built-in timing function (0~999 min), standby alarm protection for the equipment.
Power	2.1KW
Scope	6L
Sealing unit	Imported PTFE and special synthetic materials are processed and synthesized by special process technology to enhance sealing, corrosion resistance and wear resistance.
Condensing pipe	Vertical Double-layer Flanged Coil Condenser,condensing area of 0.45m², with dripping point and anti-backflow design.
Degree of protection	IP42
Ambient temperature	5~40℃
Voltage	AC220V/50HZ
Instrument size	8504201100mm
Weight	83KG

Applications of Dual-Purpose Rotary Evaporator

High-Temperature Oil-Bath Processing

The oil-bath configuration supports compatible samples requiring heating temperatures above the normal water-bath range.

Powder Drying

Intermittent forward and reverse rotation supports compatible powder and solid samples during reduced-pressure drying workflows.

Chemical & Pharmaceutical Research

Used for larger-volume evaporation and concentration of reaction solutions, solvent extracts and pharmaceutical intermediates during laboratory synthesis and purification.

Natural Product Extraction

Suitable for concentrating plant extracts, herbal solutions and botanical fractions after solvent extraction.

Food & Flavor Research

Used for evaporation and concentration of food extracts, flavor solutions, plant oils and agricultural samples.

How to Choose a Water Bath Rotary Evaporator Type?

Standard: For laboratories using an existing external vacuum-control setup.

Vacuum Control: Includes a built-in vacuum controller for setting and adjusting the required vacuum level during evaporation.

Standard or Vacuum Control Configuration 2

FAQ

The brochure specifies 3 L/h for water and 6 L/h for ethanol.

Yes. The dual-purpose bath supports an oil-bath temperature range from room temperature to 210°C ±2°C.

Room temperature to 99°C ±0.5°C.

Yes. Forward/reverse intermittent rotation can be set from 0 to 60 seconds for compatible powder-drying applications.

The heating bath provides 0–140 mm automatic lifting.

Yes. The built-in timer supports 0–999 minutes.

Yes. A Vacuum Control configuration is available with a built-in vacuum controller.

The brochure confirms a built-in vacuum controller, but does not state that a vacuum pump is integrated. Confirm the required external vacuum source before ordering.

The vertical double-layer condenser provides 0.45 m² of condensing area.