SZ Series Automatic Pure Water Distiller
The SZ Series automatic pure water distillers are designed for laboratory preparation of primary, secondary and tertiary distilled water. The series uses quartz-tube heating and a glass distillation path so that the distilled water does not contact metal components during the distillation process. Automatic water-level control and protection functions support continuous and safer laboratory operation.
- Distillation Stage: Primary / Secondary / Tertiary
- Flow Rate: 1800 / 1600 / 1500 mL/h
- Input Power: 1.5 / 3 / 4.5 kW
- Power Supply: AC 220 V / 50 Hz
- Heating Method: Quartz Heating Tube
- Water-Level Control: Automatic Power On / Off
SZ 96 SZ 93 SZ 97
With different requirement of the pure water, SZ series automatic water distiller can be classified into the following 3 types:
| Single stage automatic pure water distiller | Double stage automatic pure water distiller | Triple stage automatic pure water distiller |
| Pure water | Purer water | Purest water |
Features of SZ Series Automatic Pure Water Distiller
- The SZ series automatic pure water distiller is heated with quartz heating tube, which is energy-saving,pure, durable and of high radiation rate.
- The adoption of stainless steel in supporting shelf and clamp; special engineering plastics made of control panel and mian distiller body made of quality glass.
- The pure water distillated does not contact with any metal products.
- The SZ series automatic water distiller is ideal for the distillation of pure water.
- All SZ series automatic pure water distiller is equipped with reply protection, which is safe and reliable to use.
- The distiller switch can be controlled with temperature controller and spring gauge controller, which helps avoid glass breakage caused by dry heating of loop heat pipe.
- Power supply will be automatically connected or cut off in high water line or low water line. So the pure water distiller is fully automatic.

Choose by Distillation Stage
SZ-96: Suitable for preparing primary distilled water in laboratory.
SZ-93: Uses a second distillation stage for laboratories requiring secondary distilled water and a higher purification level than single-stage distillation.
SZ-97: Adds a third distillation stage for laboratory workflows requiring a higher distilled-water purity level than secondary distillation. The instrument has relay protection device for primary, secondary and tertiary distillation, which is safe and reliable to use.

Technical Parameter of SZ Series Automatic Pure Water Distiller
| Model | SZ-96 | SZ-93 | SZ-97 |
| Flow rate | 1800ml/h | 1600ml/h | 1500ml/h |
| Input power | 1.5Kw | 3Kw | 4.5Kw |
| Voltage | AC220v/50Hz | AC220v/50Hz | AC220v/50Hz |
| Pack size (mm) | 660*370*310mm | 570*480*390mm | Condenser 570*480*390mm,5.8kgHost 610*450*440mm,10kg |
| Weight | 5.4kg | 10kg | 15.8kg |
| Size (mm) | 770*200*68mm | 770*360*780mm | 770*490*890 |
Applications of SZ Series Automatic Pure Water Distiller

Laboratory Water Preparation
Preparation of primary, secondary or tertiary distilled water according to the selected model.

Routine Laboratory Support
Provides distilled water for compatible general laboratory workflows requiring laboratory-prepared distilled water.

Multi-Stage Distilled Water Preparation
SZ-93 and SZ-97 support secondary and tertiary distillation when additional distillation stages are required.






























