uPM60C Vital Signs Monitor

The uPM60C Vital Signs Monitor is a low-cost monitor for spot checking, continuous, non-invasive monitoring, or recording of functional oxygen saturation of arterial hemoglobin (SpO2), pulse rate, pulse strength, end-tidal CO2, FiCO2, and Respiration Rate. The monitor is a 4400mAh lithium battery and Type-C adapter-powered device. It may be used in the hospital, clinical environment, homecare, and during emergency land transportation.

Features

  • 3.5′ Large size color touchscreen (optional), 320X480 pixels.
  • Two types of power supply: AC charger or 4400mAh Lithium battery.
  • Three measurement modes: spot-check, monitoring, and record.
  • Continuous storage of data for 999 patient data in 120 hours.
  • Capnograph with trends and SpO2 with waveform.
  • Different types of patients provide different alarm limits default values.
  • Silent sleep monitoring , with data storage and automatic power-saving features for patients with 24 uninterrupted care.
  • Suitable for adults, pediatric and neonate patients.

SPECIFICATIONS

Enclosure

Weight

280g(0.617lb) with batteries

Dimensions

78.5mmW x 158mmH x 31.5mmD (3.09in.W x 6.22in.H x 1.24in.D)

Display

Screen size

88.9mm (3.5in.), measured diagonally

Screen type

TFT LCD, white LED backlight

Resolution

320×480 pixels

Alarms

Categories

Patient status and system status

Priorities

Low, medium, and high

Notification

Audible and visual

Setting

Fullstorage, low battery and sensor off

Alarm volume level

45 to 85 decibels

Alarm system delay

<10 seconds


SpO2

Measurement range

1% to 100%

Accuracy

70-100% (±2%), <70% undefined

Resolution

1%

Displaywave speed

10.00mm/sec

Trend

Tabular

Memory

Saves a total of 120 hours of data events; saves date and time, alarm conditions, measurements

Tabular format

One table for all parameters

ECTO2

Mode

Sidestream or Mainstream

Aturation Range

0-150mmHg

Accuracy

0-40mmHg±2mmHg 41-150mmHg±10% of reading

Resolution

0.1mmHg

Flow Rate

50ml/min±10ml/min

PulseRate

PR range

25bpm to 250bpm

Accuracy

±2bpm / ±2% take maximum

Resolution

1bpm

Electrical

Battery

Lithium battery with 4,400mAh  will  typically  provide 15 hours of monitoring with no external communication, no audible alarm sound

Type

Lithium Battery

Voltage

3.7V

Environmental

Transport and Storage

OperatingConditions

Temperature

−20ºC to 60ºC (−4ºF to 140ºF)

0ºC to 45ºC (32ºF to 113ºF)

Altitude

−500 to 5,000m (−1,640 to 16,404 ft.)

Relative humidity

15% to 95%x non condensing

Configuration

Standard

Adult finger clip SpO2 sensor, Main uint, Base, Mainstream ETCO2 Sensor

Optional

Adult finger clip SpO2 sensor, Main uint Neonate SpO2 sensor, Pediatric SpO2 sensor, Various SpO2 sensors (earclip, disposable, silicone softtip, etc), AC Adapter/Data Analysis Software, Sidestream sensor

ACCESSORIES

图片8

Other Patient Monitor