Anaerobic Workstation DW-LAI-D2


  1. This workstation integrates CO2, Constant temperature and humidity, anaerobic incubator whole.
  2. Can operate as an anaerobic or micro-oxygen chamber (oxygen concentration: 0-10%).
  3. Fully automatic humidity control system to avoid drying of the Petri dishes.
  4. Sample transfer: can transfer 40 pcs of 90mm plates at a time, single dish transfer device is optional.
  5. Available with automatic sleeve gassing system operated by foot-switch, so you can control vacuum and Nitrogen gas filling efficiently.Equipped with standard external vacuum pump.
  6. Using high-efficiency palladium catalyst to keep the oxygen concentration less than 0.1% without frequent activation.
  7. UV lamp for sterilization.
  8. Full-automatic control for gas replacement path, with positive pressure and negative pressure protection.
  9. Can perform CO2 , humidity and temperature control.
  10. Unique oil bottle type pressure relief design, protects internal positive pressure and prevents air leakage.
  11. With a number of low pressure, over temperature protection devices.
  12. The whole front cover can be lifted off for placing large instruments or thorough cleaning.
  13. Equipped with standard power socket.
  14. Touch screen directly displays the oxygen percentage of the operating room, easy for observation.
  15. Latex gloves for comfortable and flexible operation.
  16. Bare-hand operating system is optional. Ensure comfortable operation with no skin allergies.


Model DW-LAI-D2
Time for creating anaerobic state in sample chamber <5 minutes
Time for creating anaerobic state in operation chamber <1hr
Anaerobic environment maintenance time >12hrs (when no supply of mixed gas)
Temperature Range RT+3~60℃
Temperature Stability <±0.3℃
Temperature Uniformity <±1℃
CO2  Range 0~20%
CO2  Control Accuracy ±0.1%(imported sensor)
Humidity Control Range 50~90%RH
Humidity Fluctuation ±3%RH
Power Rating 1500W
Power Supply AC 220V,50HZ(can customized)
Interior Chamber Size (W×D×H)cm 42×29×47.5
Operation Chamber Size (W×D×H)cm 95×67×75
Sampling chamber size (W×D×H)cm 40×30×32
Shell material All 304 stainless steel