TDD-4MC Plasma (PPP) Biofiller Gel Maker 

What is Plasma Bio-filler ?

Plasma bio-filler extracts plasma from litigant’s blood, and then made plasma liquid to gel, then inject into the body.PPP filling technology is made by the plasma extracts from a litigant’s blood into a gel and then injects it into the body. During the process, our model TDD-4MC is the important equipment to make blood plasma into autologous collagen, TDD-4MC adopts advanced cooling and heat system, it can control the temperature accurately, and the autologous collagen made by TDD-4MC replaced the high-cost filler. With good features of no toxic and no side effects, at the same time, can extract PRP (Platelet Rich Plasma) inject into the dermis, promote skin recovry, help to eliminate wrinkles, enhance the face, shrink pores, tender skin, etc.

Plasma Bio-filler

Technical parameters

NamePlasma Bio-filler Gel Maker
ModelTDD-4MC
DisplayLCD display
Temperature RangeRT~+90℃
Capacity10 syringes
Power45W 220V 50Hz or 110V 60Hz
Dimension25×25×14(cm)
Weigh5.26Kg
Warranty13 month

Advantages of filling by PPP autologous collagen

  1. Ideal effect: the autologous collagen can promote the cells growths, keep the skin elasticity.

2. Long time maintaining: Inject once time maintains 4-7 months.

3. Safety: its extract from body, its very safe. And Rejection Reaction

4. Low cost: Extract from own body and save much cost.

Application

  1. Fill all kinds of wrinkles and add volume and smooth out the deep creases and wrinkles in the face

2. Solve the check depression and augment cheeks to enhance youthfulness

3. Plumping thin lips and Nose reshaping

4. Modify the chin outline

5. Nose re-shaping

6. Improve the profile of body part

7. Reduce fine lines around the neck

8. Reduce or remove eye-bags

9. Improve the appearance of recessed scars

10. Enhance shallow contours

How to make PPP autologous

Step 1: Blood collection

Step 2 :Blood separation by centrifuge

Step 3:PPP collection

Step 4:Heat PPP at 75 ℃ for 5 -8mins

(Note:please pre-heat to75 ℃ before put syringes into)

Step 5: Put PPP into cooling holes for 5 mins., the the PPP gel make finished.

Step 6: Inject the PPP gel into the needed place

PPP gel make process

How to make PPP autologous

Note:

1.This machine only for PPP gel make, should be use together with our centrifuge

2.During operation , don’t need to add anything else (such as PRP).

3.Suggest don’t use PRP to make Gel, because its easy to inactivity.